Yamaha YZF R1 2020 Owner's Manual page 36

Instrument and control functions
Warning icons
1 2
1000 r/min
5
1. SCU trouble warning "
2. Auxiliary system warning "
3. Coolant temperature warning "
4. Oil pressure warning "
5. Error mode warning "Err"
When an error is detected, the follow-
ing error-related warning icons will
then be viewable.
SCU trouble warning "
This icon appears if a problem is de-
tected in the front or rear suspension.
Auxiliary system warning "
This icon appears if a problem is de-
tected in a non-engine-related system.
Coolant temperature warning "
This icon appears if the coolant tem-
perature reaches 117 °C (242 °F) or
3 4 5
higher. Stop the vehicle and turn off the
engine. Allow the engine to cool.
NOTICE
Er r
Do not continue to operate the en-
gine if it is overheating.
Oil pressure warning "
"
This icon appears when the engine oil
"
pressure is low. When the vehicle is
"
" first turned on, engine oil pressure has
yet to build, so this icon will come on
and stay on until the engine has been
started.
TIP
If a malfunction is detected, the oil
" (YZF-R1M)
pressure warning icon will flash repeat-
edly.
NOTICE
"
Do not continue to operate the en-
gine if the oil pressure is low.
" Error mode warning "Err"
When an internal error occurs (e.g.,
communication with a system control-
ler has been cut off), the error mode
warning will appear as follows.
ECA10022 "Err" and "
"Err" and "
"Err" only indicates an ABS ECU error.
TIP
Depending on the nature of the error,
"
the display may not function properly
and YRC settings may be impossible
to change. Additionally, ABS may not
function properly. Use extra care when
braking and have a Yamaha dealer
check the vehicle immediately.
ECA26410
5-12
" indicates an ECU error.
" indicates an SCU error.