of overall system intervention, while
setting level 9 applies the greatest
amount of overall traction control.
TIP
TCS can only be turned on or off
via the main screen using the
mode switch.
When TCS has been turned off,
TCS, SCS, LCS, and LIF will be set
to OFF and cannot be adjusted.
When TCS is turned on again,
these
related-traction
functions will return to their previ-
ous setting levels.
1
TCS
2
1. System intervention
2. Lean angle
SCS
SCS can be set to OFF, 1, 2, and 3.
OFF turns the slide control system off,
setting level 1 provides the least
amount of system intervention, and
setting level 3 provides the greatest
amount of system intervention.
1
SCS
control
9
8
1. System intervention
7
6
5
2. Sideward slide
4
3
2
1
LCS
LCS can be set to 1, 2, or OFF. Setting
level 1 keeps engine speed from rising
above 9000 r/min even when the throt-
tle grip is fully turned. Setting level 2
keeps engine speed from rising above
8000 r/min. OFF disables the LCS
function from the selected YRC mode
Instrument and control functions
(the LCS icon will not appear and the
launch control function cannot be acti-
vated).
When LCS has been set to level 1 or 2
for the selected YRC mode, the LCS
indicator on the main screen will ap-
pear in a grey color to indicate that
LCS is available. When the launch con-
trol system has been activated (made
ready for use via the mode switch), the
3
2
LCS indicator will turn white.
1
TIP
LCS works in conjunction with the LIF
system. LCS cannot be used if LIF is
turned off.
2
QSS
The quick shift system is divided into
QS
sections. QS
linked and can be independently
turned on or off.
QS
ting level 1 is designed for maximum
acceleration, while setting level 2 is de-
signed to give smooth shifts at halfway
or less throttle openings. OFF turns the
5-15
(upshift) and QS
(downshift)
and QS
are not
can be set to 1, 2, or OFF. Set-
5