Yamaha YZF R1 2020 Owner's Manual page 35

TIP
 The suspension will remain fixed
at its most recent settings until
self-reset has completed.
 If the ERS indicator does not re-
turn to normal, have a Yamaha
dealer inspect the vehicle.
GPS indicator " "
GPS
(CCU-equipped models)
This icon comes on when a GPS unit is
synched with your vehicle.
Logging indicator " "
(CCU-equipped models)
This icon comes on when vehicle data
is being recorded via the logging func-
tion.
Clock
The clock uses a 12-hour time system.
Lap timer
This stopwatch function measures and
records up to forty laps. On the main
screen, the lap timer shows the current
lap time and lap number (indicated by
the LAP mark). Use the Pass/LAP
Instrument and control functions
switch to mark lap times. When a lap is
completed, the lap timer will show the
latest lap time (marked by the LATEST
indicator) for five seconds.
1
LCS QS LIF 2 GPS
1000 r/min
LATEST
12 34
12
4
01
LAP
12 123456
ODO
MPH
MPH
A 1 3 2
MODE- PWR TCS SCS EBM
3
1. Lap time
2. Latest lap time indicator "LATEST"
3. Information display item
4. Lap number
To use the lap timer
1. Short push the wheel switch. The
information display item will flash
for five seconds.
2. While the information display item
is flashing, rotate the wheel switch
upward. The lap timer will flash for
five seconds.
3. While the lap timer is flashing, long
push the wheel switch to activate
the lap timer or stop the lap timer.
5-11
4. When the lap timer has been acti-
vated, press the Pass/LAP switch
to start the lap timer.
TIP
 The engine must be running to use
the lap timer.
10 : 00
 Set the information display to
2
FASTEST or AVERAGE for addi-
GEAR
tional lap time information.
N
 Accessing the MENU screen will
automatically stop the lap timer.
mile
1
T-2
 Whenever
stopped, the current lap will not be
recorded.
 The lap time record can be viewed
and reset from the MENU screen.
5
the lap timer is