Yamaha YZF R1 2020 Owner's Manual page 38

Instrument and control functions
MENU
MPH
Display Mode
YRC Setting
Lap Time
Logging
Maintenance
Unit
5
2. Select "STREET
"TRACK MODE" (or select the tri-
angle mark to exit).
Display Mode
MPH
STREET MODE
TRACK MODE
3. Long push the wheel switch to exit
the MENU screen or use the wheel
switch to select another module.
"YRC Setting"
This module allows you to customize
10 : 00
GPS
the four YRC modes MODE-A, MODE-
B, MODE-C, and MODE-D by adjust-
ing the setting levels (or on/off status
as applicable) of YRC items PWR,
TCS, SCS, LCS, QSS, LIF, EBM, and
BC. For YZF-R1M, you can select the
ERS mode to be associated with each
YRC mode, and also adjust the setting
MODE" or
levels of the ERS modes.
TIP
 TCS has 9 setting levels and ERS
has 6 modes.
10 : 00
 Whenever there are more selec-
tions (setting levels or modes)
available than can be shown on
the screen at one time, a scroll bar
will appear to notify you that addi-
tional selections are available by
scrolling.
PWR
Select PWR-1 for the most aggressive
throttle response, PWR-2 and PWR-3
for smoother throttle grip/engine re-
sponse, and use PWR-4 for rainy days
or whenever less engine power is de-
sirable.
1. PWR 1
2. PWR 2
3. PWR 3
4. PWR 4
5. Throttle valve opening
6. Throttle grip operation
TCS
This model uses a variable traction
control system. For each setting level,
the further the vehicle is leaned over,
the greater the amount of traction con-
trol (system intervention) is applied.
There are 9 setting levels available.
Setting level 1 applies the least amount
5-14
1
5
6
2
3
4