Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
clockwise.
Periodic maintenance and adjustment
EAU24205
1
1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
Replacing the license plate
1
light bulb
[ECA11192]
1. License plate light unit
2. Collar
3. Nut
4. License plate light bulb socket
6-38
1. Remove the license plate light unit
by removing the nuts and collars,
and then remove the license plate
light bulb socket (together with the
bulb) by pulling it out.
3
4
3
2. Remove the burnt-out bulb by pull-
ing it out.
EAU58010
1
2
3
4
5
2
1
6
7
2
8
9
10
11
12