Table of Contents
Advertisement
Basics
Charging
Before using your Smart Bluetooth® Speaker BSP60 for the first time, you need to
charge it for approximately 2 hours. Sony chargers are recommended.
The battery status is indicated on the display as
turned on.
To charge your device
1
Slide the power switch to the off position.
2
Plug one end of the USB cable into the charger.
3
Plug the other end of the cable into the Micro USB port of your device.
Turning on and off
To turn on your device
•
Slide the power switch to the on position.
To turn off your device
•
Slide the power switch to the off position.
When the battery runs out, the device turns off automatically. If this happens, you must slide
the power switch to the off position before your device can start charging.
Resetting the device
You can reset your device to restart it in situations where it behaves unexpectedly.
No settings or pairing information get deleted when you perform such a reset.
You can also reset your BSP60 speaker to its original factory settings. All settings get
deleted when you perform this kind of reset, which is sometimes necessary if you
want to reset the clock or alarm or delete pairing information in the Smart Bluetooth®
Speaker application.
To reset the device
•
Using the tip of an unfolded paper clip (or a similar object with a long fine tip),
press the reset button and then release it.
To perform a factory data reset
•
Slide the power switch to the PAIRING position for 12 seconds and then
release it.
This is an Internet version of this publication. © Print only for private use.
when your BSP60 device is
4
Advertisement
Table of Contents
