Contents Introduction..................3 Function overview................3 Hardware overview................3 Basics.....................4 Charging....................4 Turning on and off................4 Resetting the device................4 Getting started................5 Installing necessary applications on your Android™ device.....5 Using your device................7 Using voice controls................7 Making phone calls................9 Playing music ..................9 Setting alarms..................10 Setting your device to move around..........11 Guidelines for using the "Dance with music"...
NFC enabled Android™ calling device to the BSP60 and you’re ready to talk, hands free. You can also use NFC One-touch to instantly play back music. And with a new, fun dance mode, the BSP60 can dance in time to your music.
No settings or pairing information get deleted when you perform such a reset. You can also reset your BSP60 speaker to its original factory settings. All settings get deleted when you perform this kind of reset, which is sometimes necessary if you want to reset the clock or alarm or delete pairing information in the Smart Bluetooth®...
Voice Control application for your Smart Bluetooth® Speaker. To pair and connect any previously connected Android™ device with your BSP60 speaker at a later time, just touch the NFC detection area of the Android™ device to the NFC area of the BSP60 speaker.
Page 6
Android™ device: Open the Play Store application. Tap the search icon, then search for the Smart Bluetooth Speaker application. When Smart Bluetooth® Speaker BSP60 appears, tap it. The Smart Bluetooth® Speaker application starts to download. Launch the Smart Bluetooth® Speaker application and follow the relevant instructions to connect your Android™...
Using your device Using voice controls When you set up your Android™ device and the BSP60 speaker for use, the Voice Control application for the speaker is downloaded as part of the setup. You must have this application installed before you can use voice commands. Also, you must enable the "OK, speaker"...
Page 8
Say "OK, speaker". If your voice command is recognised, the voice control function gets triggered and both speaker covers pop out. The BSP60 speaker emits a beeping sound, indicating that it's ready to receive voice commands. Speak a voice command, for example, "What's the time?"...
Bluetooth® Speaker, or you can make phone calls directly from your Bluetooth® Speaker using voice controls. For more information about the Voice Control application and supported functions, go to http://voicecontrol.sony.net. To make a phone call Make sure the Voice Control application is launched.
You can set alarms on your Android™ device and they can sound via the BSP60 speaker when they go off. Or you can set alarms directly on the BSP60 speaker using voice controls. For more information about the Voice Control application and supported functions, go to http://voicecontrol.sony.net.
"Dance with music" action, make sure that the device has a total available free space around it of 30 cm squared. The BSP60 speaker normally goes back to its original position after a “Dance with music” routine. Note, however, that the BSP60...
What is the function of the speaker covers? If they get damaged, can they be removed and replaced? The speaker covers protect your BSP60 device from dust when it's not in use. They can become detached if excessive force is applied, but can be snapped back into place if the proper procedure is followed.
Important information leaflet separately provided. Prior to use, please read the This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Sony Mobile Communications Inc.
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any change or modification not expressly approved by Sony may void the user's authority to operate the equipment.