Appendix #4 - Pin Configurations - Maxtor 777 W V1.0 User Manual

APPENDIX #4 – PIN CONFIGURATIONS
25 pin com port
GND
ALARM INPUT
PIN OFF
EXTERNAL ALARM NO
EXTERNAL ALARM COM
DMR
To connect wire from ALARM INPUT ( PIN 2 -- 9 ; PIN 15-22) to GND
( PIN 1 ) connector, DMR will start recording and buzzer will be on.
Ø When Menu/ Camera/ Alarm is set up to "Low" :
When alarm input signal is " Low ", the unit starts to record and buzzer.
Ø When Menu/ Camera/ Alarm is set up to "High" :
When alarm input signal is " High ", the unit starts to record and buzzer.
Under normal operation COM disconnect with NO. But when Alarm
triggered, COM connect with NO.
Under normal operation COM disconnect with NO. But when Alarm
triggered, COM connect with NO.
EXTERNAL ALAM NO
EXTERNAL ALARM COM
PIN OFF
ALARM INPUT 9
ALARM INPUT 10
ALARM INPUT 11
ALARM INPUT 12
ALARM INPUT 13
ALARM INPUT 14
ALARM INPUT 15
ALARM INPUT 16
ALARM INPUT 1
ALARM INPUT 2
ALARM INPUT 3
ALARM INPUT 4
ALARM INPUT 5
ALARM INPUT 6
ALARM INPUT 7
ALARM INPUT 8
PIN OFF
GND
GROUND
----
50
PIN 1
PIN2-9;
PIN 15-22
PIN10,11,12,13,
14,21,24
PIN13
PIN 25