Table of Contents
Advertisement
Step4 : Router setting
NOTE : In the router setting, we have four steps as follows.
1. Dial setting
2. DHCP setting
3. Virtual server setting
4. DDNS setting
(◇ The following settings will differ from router to router. Please refer to
the user's manual of router)
1.Press "INTERNER PORT" and choose your WAN type (e.q. PPPoE), and then enter
your "User Name" and "Password" of dialing up to dynamic IP. Press save after
you finish the set up.
2. Press "LOCAL PORT" and set "Start IP address" and "Number of IP address".
(For example, if the IP address of DMR is 192.168.1.10, then 10 is excluded from the setting range)
Press save after you finish setting up.
TEST
30
Advertisement
Table of Contents
