Electrical Connection (3-wire)
(cont.)
Bare Wire Connection
Eyelet Connection
4
1
1
1
Attach line #1 (black) and line #2 (red)
To make a bare wire connection, use holes on the left
side of the terminal block. To connect eyelet style
leads to outside terminal. Attach neutral wire (white)
to center terminal on the terminal block.
wires, use holes on right side of terminal.
6
5
1
Reattach access door.
Push supply cord toward terminal
block to relieve strain, reattach supply cord strain
relief bracket over supply cord.
16