Flatlock Sewing; Ladder Stitch - Pfaff Coverlock 3.0 Owner's Manual

Hide thumbs Also See for Coverlock 3.0:
Table of Contents

Advertisement

Flatlock sewing

look, or with the right sides together, to create a ladder stitch.
• Use the left or the right needle.
(see page 10). Thread the lower looper and the left (A)
or right (B) needle.
looper and the left (A) or right (B) needle.
• Place the wrong sides of the two pieces of fabric
together to sew a decorative stitch on the right side of
the garment.
lower looper thread will pull into a straight line at the
fabric edge.
• Unfold the fabric and pull on opposite sides of the
• Place the movable upper cutter in the B position (see
page 9). The fabric should not be trimmed on this
stitch.
• Follow steps 1-3 above.
• Fold the fabric piece, wrong sides together, to sew a
decorative stitch from the right side of the garment (at
the fold).
• Position the fabric so the seam is sewn with part of the
stitch extending off the fabric.
• Unfold the fabric and pull on opposite sides of the

Ladder stitch

To create a ladder stitch, sew with right sides of the fabric
together. The needle thread will be the prominent thread
that creates the ladder.
30
Stitches & sewing techniques
Engage the 2-thread converter
Thread the lower and upper
3-thread ladder stitch

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Coverlock 3.0 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents