Divide One Titles Into Two; Combining Two Chapters Into One - Zenith ZRY-316 Installation And Operating Manual

Divide One T itles Into T
Divide One T itles Into T
+RW
Use this command to split a title up into two new
titles.
1. On the Title List menu, select a title you want to
divide then press ENTER.
The menu options appears on the left side of the
screen.
2. Select [Divide] option.
Example: Title List (DVD+RW)
3. Press ENTER.
[Title Edit (Divide)] menu appears.
[Divide] option is highlighted.
Current picture
4. Use play, pause step, search and slow-motion to
find the point you want to divide the title.
5. Select [Divide] option then press ENTER at the
point.
To reset the point, select [Cancel] option then
press ENTER. Repeat from step 3.
6. Choose [Done] option then press ENTER to fix
the dividing point.
The title is divided into two new titles. It take up to
4 minutes to divide.
Note:
You cannot select dividing point less than 3 seconds.
wo Combining T
wo Combining T
Into One
Into One
Use this function to combine two adjacent chapters
into one.
1. On the Chapter List menu, select the second
chapter of the two chapters you want to combine
then press ENTER
The menu options appears on the left side of the
screen.
2. Use v / V to select [Combine] option.
The combine indicator appears between the two
chapters you want to combine.
Example: Chapter List (DVD+RW)
3. Repeat steps 1 - 2 to continue to combine from
the menu.
4. Press RETURN ( O) repeatedly to exit the
menu.
The first title's
Notes:
thumbnail
This function cannot operate listed as below;
If there is only one chapter within the title.
•
The second
If you select last chapter.
•
title's thumbnail
If the chapter has been hidden.
•
wo Chapters
wo Chapters
-RW +RW +R
VR
43