Dvd Operation; Playing Dvds; General Features; Selecting Other Titles - Zenith ABV441 - Allegro Progressive Scan DVD Player Hi-Fi Stereo VCR Video Cassette Recorder Combination Installation And Operating Manual

DVD Operation

Playing DVDs

Playback Setup
DVD
Turn on the TV and select the video input source con-
nected to the DVD+VCR.
Audio system: Turn on the audio system and select
the input source connected to the DVD+VCR.
Set the Output Source to DVD as shown in "Selecting
the Viewing Source" on page 6.
1 1
Press OPEN/CLOSE (Z Z ) to open the disc tray.
2 2
Load your chosen disc in the tray, with the label
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing down.
3 3
Press OPEN/CLOSE (Z Z ) to close the tray.
Playback starts automatically. If playback does not
start, press N (PLAY).
In some cases, the disc menu might appear
instead.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
DVD
Use b/B/v/V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or DISC MENU to return to the menu
screen.
4 4
To stop playback at any other time,
press STOP (x x ).
This is RESUME STOP mode.
To exit RESUME STOP mode, press STOP (x x )
again.
Notes
If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit password
must be entered and/or the disc must be authorized
(see "LOCK", on page 20).
DVDs may have a Region Code.
Your DVD+VCR will not play discs that have a Region
Code different from your DVD+VCR. The Region
Code for this DVD+VCR is 1 (one).
Do not keep a fixed image displayed on the screen
for a long time.

General Features

Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.

Selecting other TITLEs

When a disc has more than one title, you can select
another title as follows:
Press DISPLAY, then press the appropriate number
buttons (0-9) to select a title number.

Selecting other CHAPTERs

DVD
1 / 12
When a title on a disc has more than one chapter or a
disc has more than one track, you can select another
chapter as follows:
Press SKIP . or > briefly during playback to
return to the beginning of the current chapter or to
select the next chapter.
Press SKIP . twice briefly to step back to the pre-
vious chapter.
To go directly to any chapter during playback,
press DISPLAY. Use v v /V V to select Chapter icon.
Then, enter the chapter number with the number
buttons (0-9).
Note
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.

Slow Motion

DVD
1 Press PAUSE/STEP (X) during playback.
The DVD+VCR will now go into PAUSE mode.
2 Press SKIP . or > during pause mode.
The DVD+VCR will enter SLOW mode.
3 Use SKIP . or > to select the required speed:
t 1/16, t 1/8, t 1/4, t 1/2 (backward), or T
1/16, T 1/8, T 1/4, T 1/2 (forward).
4 To return to playback, press N (PLAY).
DVD
1 / 3
27