Naxa NCD-691 Instruction Manual
  1. Manuals
  2. Brands
  3. Naxa Manuals
  4. Car Receiver
  5. NCD-691
  6. Instruction manual

Naxa NCD-691 Instruction Manual

3 tft fold down detachable motorized pll electronic tuning stereo am/fm radio with dvd player, usb/sd/mmc inputs
Hide thumbs Also See for NCD-691:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
Enlarged version
IMPORTANT INFORMATION REQUIRED BY THE FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)this device may not cause harmful interference; and (2) this device must accept
any interference received, including interference that may cause undesirable operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation .
This equipment generates.uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio elevation
reception, which can be determined by turning the equipment off and on. The user is encouraged
to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
* Consult the dealer or an experienced radio/TV technician for help.
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com

Instruction Manual

MU
APS
MODE
BND
1
4
RDM
2
5
INT
-10
VOL
3
6
RPT
+10
UP
DN
SEL
CLK
EQ
PWR
EQ
BAND
P/N
MU
MODE
MENU
0K
SEL
+
SETUP
Fully Compatible to These
1
4
2
3
-10
+10
Formats of Files: DVD,VCD,
5
6
7
8
9
0/10
10+
CLK
JPEG,MP4,MP3,WMA,CD.
SLOW_FWD
ST
LOC
SEARCH
APS
ZOOM
INT
RPT
RDM
AUDIO
TITLE/PBC
SUBTITLE
A-B
PROG
OSD
LOUD
STEP
"
3 TFT Fold Down Detachable Motorized
PLL Electronic Tuning Stereo AM/FM Radio
with DVD Player, USB/SD/MMC Inputs
Remark: Any information subject to change without further notice
NCD-691
REL
USB
3" TFT
AV

Advertisement

Table of Contents
loading

Related Manuals for Naxa NCD-691

Summary of Contents for Naxa NCD-691

  • Page 1: Instruction Manual

    NCD-691 Instruction Manual IMPORTANT INFORMATION REQUIRED BY THE FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesirable operation.
  • Page 2 PRECAUTION WARNING: TO REDUCE THE CAUTION RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE RISK OF ELECTRIC SHOCK THIS APPLIANCE TO RAIN OR DO NOT OPEN MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

  • Page 3: Table Of Contents

    Contents 7. Specification 1. Before Operation...................3 1.1 Glossary....................3 1.2 Precautions....................3 General Specification 1.3 Maintenance and Cleaning of Discs............4 1.4 Battery Information of the Remote Control..........4 Power Supply Requirement..........DC 12V 1.5 The Remote Control Description..............5 Maximum Power Output....25W x 4 (measured at DC 14.4 V) 1.6 Locations and Names of the Controls............6 Dimensions(w x h x d)...........178 x 50 x 165mm 1.7 Description of the Rear Cabinet.......

  • Page 4: Before Operation

    6. The Trouble Shooting 1. Before Operation Please read the user s manual carefully before using the DVD play er. If you have any troubles in using this player, try to solve the problems by the suggest ions mentioned below. If you can 1.1 Glossary not remove the trouble after using all the suggestions, please contact the company or the technical servic e center authorized by us .

  • Page 5: Maintenance And Cleaning Of Discs

    1.3 Maintenance and Cleaning of Discs .20 The Region Code Disc Maintenance 1. To keep the disc clean, andle the disc by its edge, do not touch the disc Q: Not begin to playback but to display REGION ERROR after inserting disc into surface of the play side.

  • Page 6: The Remote Control Description

    1.5 The Remote Control Description 1. P/N BUTTON It is for adjusting the hue of the video output. SATURATION 2. MENU BUTTON It is for adjusting the saturation of the video output. SHARPNESS 3. POWER BUTTON BAND It is for adjusting the sharpness of the video output. MODE MENU 4.

  • Page 7: Locations And Names Of The Controls

    1.6 Locations and Names of the Controls 5.19.2 LANGUAGE SETUP LANGUAGE SETUP OSD LANGUAGE AUDIO LANG MODE SUBTITLE LANG MENU LANG 3” TFT OSD LANGUAGE This item is for selecting the language of the SYSTEM MENU and all operating prompt interface displayed during playback. AUDIO LANG This item is for selecting a audio language.

  • Page 8: Description Of The Rear Cabinet

    1.7 Description of the Rear Cabinet GREEN GREY SUBWOOFER RED R For the DVD System Menu, there are 6 setup pages in all. They display as follows: BLACK RCA LINE OUT Fixing Screw Bolt BLACK WHITE L 5 .19.1 SYSTEM SETUP Reversal line White Ground(-)/Park Break(Green) SYSTEM SETUP...

  • Page 9: Unit Installation

    3. During JPEG playback, press one of the >/</^/v buttons to change the angle of viewing picture that is displaying as follows: 1.8 UNIT INSTALLATION >: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root menu.

  • Page 10: Common Operation

    .14 Program Playback 2. Common Operation It allows you to enter the order in which you want some chapters/tracks in DVD/VCD/MP3/WMA/CD disc to play. 1 During playback, press the PROG button to enter a program interface as 1. To turn on/off the unit follows: Under power off mode, press the POWER button to turn on the unit.
  • Page 11 ZOOMx2,ZOOMx3,ZOOMx4,ZOOMx1/2,ZOOMx1/3,ZOOMx1/4,ZOOM OFF. Press one of the ^/v/>/< buttons to select the area you want to enlarge. 7. To demount the front panel 1) Press the RELEASE button on the front panel to detach the front panel from the unit;(see fig. 1) .10 Change the Caption Language 2) Flip down the front panel;(see fig.

  • Page 12: Radio Operation

    5.5 Playback in Scan Mode 3. Radio Operation 1. In the state of VCD(PBC OFF)/CD disc playing, press the INT button to play the previous seconds part of each track on the disc. Press the INT button 1. BAND BUTTON again to resume normal playback.

  • Page 13: Basic Disc, Usb Or Mmc/Sd Operation

    During slow forward, press the PLAY button to resume normal playback. 4. Basic Disc, USB or MMC/SD Operation The function is only for video. 4.1 Begin playback .3 Playback with still frame 1. Press the POWER button briefly to turn on the DVD player. After turning on the DVD player, please turn on the monitor, and ensure that If the unit is currently running DVD/VCD disc, press the STEP button the video output of the monitor is the video input from the DVD player...

  • Page 14: Pause Playback

    4.2 Pause Playback In VCD mode In the state of DVD/VCD/CD/MP3/WMA disc playing, press the PAUSE 1. When starting to turn on the PBC function, it will play from the beginning of button on IR remote control to pause the playback, press the PLAY the disc till it display the PBC menu on TV screen if the disc include the PBC button to resume normal playback.

Table of Contents