Download Print this page

Braun 5743 series 1 User Manual page 11

Advertisement

English
Our products are designed to meet
the highest standards of quality,
functionality and design. We hope you
enjoy your new Braun Shaver.
Warning
Your shaver is provided with a special
cord set with integrated Safety Extra
Low Voltage power supply. Do not
exchange or manipulate any part of it.
Otherwise there is risk of electric shock.
Only use the special cord set provided
with the appliance.
Never use the appliance with a
damaged foil or cord.
The shaver is suitable for
cleaning under running tap
water.
Detach the shaver from the power
supply before cleaning it with water.
This appliance is not intended for use
by children or persons with reduced
physical, sensory or mental capabilities,
unless they are given supervision by a
person responsible for their safety. In
general, we recommend that you keep
the appliance out of reach of children.
Children should be supervised to
ensure that they do not play with the
appliance.
Oil bottle
Keep out of reach of children. Do not
swallow. Do not apply to eyes. Dispose
of properly when empty.
Description
1a Foil protection cap
1b Shaver foil
2
Cutter block
3
Release button
4
On/off switch
5
Long hair trimmer
6
Charging light (green)
7
Low-charge light (red)
(only model 199s)
8
Special cord set
Charging
Recommended ambient temperature
for charging is 5 °C to 35 °C.
The battery may not charge properly
or at all under extreme low or high
temperatures. Recommended ambient
temperature for shaving is 15 °C to
35 °C. Do not expose the shaver to
temperatures higher than 50 °C for
extended periods of time.
• When charging for the first time or
when the appliance is not used for a
few months, leave the appliance to
charge continuously for 4 hours.
• The charging light shows that the
appliance is being charged. When
the battery is fully charged, the
charging light turns off. Intermittent
blinking after a while indicates that
the battery maintains its full capacity.
This can also happen short term
when charging after the battery was
completely discharged.
• Once the shaver is completely
charged, discharge the shaver
through normal use. Then recharge
to full capacity. Subsequent charges
will take about 1 hour.
• A full charge provides up to
40 minutes of cordless shaving time
depending on your beard growth.
However, the maximum battery
capacity will only be reached after
several charging/discharging cycles.
11

Advertisement

loading

This manual is also suitable for:

5742 series 1