Oki C9600 Printing Manual page 4

Settings to Use for AB Media (continued)
Media
Select Media Type
Shelf Strip Media AB SHELFSTRIPS GL
six 1.25" x 11" strips or
(Gloss) User Type 2
(51-58 lb)
4-up Perf 8.5 x 11", AB WOBBLER MATTE
Matte Wobbler: or
AB-WBLRM User Type 1
(35 -50 lb)
4-up Perf 8.5" x 11", AB WOBBLER GLOSS
Gloss Wobbler: or
AB-WBLRG User Type 2
(51-58 lb)
Clear Low Tack AB STOCKTONSTICK
Laser Vinyl: or
AB-8018 User Type 3
(Stockton Sticker) (59-80 lb)
Clear Cling Film: AB CLEAR CLING
SSD- CFARK or
SSD- CFARK1218 User Type 3
(59-80 lb)
White Cling Film: AB WHITE CLING
SSD- WFARK or
SSD-WFARK1218 User Type 3
(59-80 lb)
Bottle Top: AB BOTTLEHANGERS
TMS-BOTTLETOP or
Ultra Heavy 2
(51-58 lb)
Table Tent: AB TBLTENT INSERTS
TMS-TABINSERT or
Ultra Heavy 2
(51-58 lb)
a. The AB specific media type names only appear in the Windows 2000 and XP drivers. If you are printing from another Windows
operating system, select the alternate media type listed.
b. Long Edge feed is restricted to a maximum of 11"
c. Face Up = side exit tray (straight-through path), Face Down = top exit tray.
Sort Edge
Paper Versus
Tray
a
Long Edge
MP Short Edge
Tray
MP Short Edge
Tray
MP Short Edge
Tray
MP Long Edge
Tray
MP Long Edge
Tray
MP Long Edge
Tray
MP -
Tray
MP -
Tray
3
Select
Output Black
Finish Comments
b c
Bin
Stacker Glossy Separate each sheet carefully to
(Face-up) avoid multi-sheet feeding.
Long edge feeding causes multiple
sheet feed.
Stacker Matte Separate each sheet carefully to
(Face-up) avoid multi-sheet feeding.
Long edge feeding causes
multi-sheet feed.
Stacker Glossy Separate each sheet carefully to
(Face-up) avoid multi-sheet feeding.
Long edge feeding causes
multi-sheet feed.
Stacker Glossy Excess glue from the edges of this
(Face-up) media could damage/ shorten the
printer and consumables life.
Stacker Glossy Separate each sheet carefully to
(Face-up) avoid multi-sheet feeding.
Excess glue from the edges of this
media could damage/ shorten the
printer and consumables life.
Stacker Glossy Separate each sheet carefully to
(Face-up) avoid multi- sheet feeding.
Excess glue from the edges of this
media could damage/ shorten the
printer and consumables life.
Stacker Glossy
(Face-up)
Stacker Glossy Paper dust can damage the printer
(Face-up) and shorten the life of
consumables.
Periodically check for paper dust
buildup on the MP Tray rollers and
clean the printer as necessary (see
page 9).