Cutter Cleaning - UBI EasyCoder 401 Linerless User Manual

UBI EasyCoder 401 Linerless – User's Manual

CUTTER CLEANING

1 /. In food industry and retail applications
subject to specific regulations, the WD-
40 could be replaced with a pure
consumable vegetable oil. After dis-
solving the residue, carefully wipe clean
the anvil blade.
1
Open the cutter.
3
Disconnect the brace and open the anvil blade by
lifting the arm. Wipe clean the anvil blade with the swab.
Regular cleaning from adhesive residue at the cutting edge of the
anvil blade at an interval of approximately 50,000 cuts is
essential for troublefree operation. Use WD-40 or a similar
1
substance . If additional cleaning of the interior of the cutter unit
is required, use a cotton swab moistened with isopropyl alcohol.
WD-40 is an anti-corrosion spray lubricant manufactured
by WD-40 Company Ltd., Milton Keynes, England,
which contains 50% alifatic petroleum distillate.
It is highly flammable and may be harmful if inhaled or
consumed and at prolonged skin contact.
Before use, carefully read the warning text on the container.
2
Soak a cotton swab with WD-40 multi-spray or similar
4
Close the anvil blade and lock it with the brace.
EasyCoder 401 LLC
Caution:
Then close the cutter.
1
.
15