Connecting A Power Amp - Marantz AV7702mkg Owner's Manual

Contents Connections

Connecting a power amp

This section describes how to install speakers and connect them to this unit. ("Speaker installation" (v p. 35), "Connecting a power
amp" (v p. 45))
Speaker installation
Determine the speaker system depending on the number of speakers you
are using and install each speaker and subwoofer in the room.
Speaker installation is explained using this example of a typical
installation.
FL
FWL
SL
SW1
SBL
Front panel Display
Playback
FR
FWR
SW2
SR
C
SB
SBR
Rear panel
Settings
Place the FRONT left and right speakers an
FL/FR
equal distance from the main listening position.
(Front speaker left/
The distance between each speaker and your TV
right):
should also be the same.
C Place the CENTER speaker in between the front
(Center speaker): speakers and above or below your TV.
Place the SURROUND left and right speakers an
SL/SR equal distance to the left and right sides of the
(Surround speaker left/ main listening position. If you don't have
right): surround back speakers, move the surround
speakers slightly behind your listening position.
Place the SURROUND BACK left and right
speakers an equal distance from the main
SBL/SBR
listening position and directly behind the main
(Surround back
listening position. When using a single surround
speaker left/right):
back speaker (SB), place it directly behind the
listening position.
Place the FRONT WIDE left and right speakers
FWL/FWR
outside of the front left and right speakers so that
(Front wide speaker
there is an equal distance between all front
left/right):
speakers.
Place the SUBWOOFER at a convenient location
SW 1/2 near the front speakers. If you have two
(Subwoofer) : subwoofers, place them asymmetrically across
the front of your room.
35
Remote
Tips Appendix
Index