Video Output - Marantz AV7702mkg Owner's Manual

Contents Connections
o HDMI Audio Out
Select HDMI audio output device.
AVP
(Default):
TV:
0 When the HDMI control function is activated, priority is given to the TV audio
setting. (v p. 170)
0 When the power of this unit is on and "HDMI Audio Out" is set to "TV", audio is
output as 2-channel from the HDMI OUT connector.
Front panel Display
Playback
Play back through speakers connected to
power amp. (Audio is output from the
PRE OUT connector on this unit.)
Play back through TV connected to the
unit.
Rear panel
Settings
o Video Output
Select the HDMI monitor connector to be used.
Auto(Dual)
(Default):
Monitor 1:
Monitor 2:
0 If both the HDMI MONITOR 1 and HDMI MONITOR 2 connectors are
connected and "Resolution" is set to "Auto", the signals are output with a
resolution that is compatible with both TVs. (v p. 220)
When the "Resolution" setting in the menu is not set to "Auto", set the
resolution in "Video" - "HDMI Monitor 1" and "HDMI Monitor 2" to one that is
compatible with both TVs. (v p. 274)
0 You can check which resolutions are compatible with your TV in "HDMI
Monitor 1" and "HDMI Monitor 2". (v p. 274)
0 This can be set by pressing HDMI OUT on the main unit.
213
Remote
Tips Appendix
The presence of a TV connected to the
HDMI MONITOR 1 or HDMI MONITOR 2
connector is detected automatically, and
that TV connection is used.
A TV connected to the HDMI MONITOR
1 connector is always used.
A TV connected to the HDMI MONITOR
2 connector is always used.
Index