First Use - DèLonghi MINI ME User Manual

F I RST U S E
1
EN
Fill water tank with fresh, drinking water. Place
cap and insert water tank to machine.
4
ON
Switch machine on. Power button starts
blinking red while machine is heating up for
approx. 30 seconds. Afterwards power button
lights steady green and machine is ready.
7
Move lever to the right to start rinsing.
2
Open locking handle and insert empty capsule
holder. Close locking handle.
Place empty container under outlet.
5
30 sec
Set the bar display to the maximum level with
the volume selector. Move lever to the left to
start rinsing.
8
STOP
Wait until the lever comes back to the middle
Fill water tank with fresh, drinking water up to
max. level.
3
Make sure that the selection lever is in "STOP"
position. Then plug the power plug into a
mains power socket.
6
Wait until the lever comes back to the middle
and extraction stops. Machine stops rins-
ing and power button blinks red for about 10
seconds.
9
Place drip grid on drip tray. Then insert drip
tray at desired position of machine.
8
STOP
STOP