3
Networking the StudioLive CS18AI Control Surface
3.2
Connecting the StudioLive CS18AI to one StudioLive RM Mixer
3.
Touch the Mixer Control field. A menu drops down with a list of
StudioLive RM-series mixers currently available on the network.
4.
Touch the name of the RM-series mixer you want to control in the list to
select it. The menu disappears, and the Mixer Control field displays the
name of the RM-series mixer to show it is connected. The power LED on
the RM mixer turns blue to show it is under the control of the CS18AI.
Your CS18AI controller is now connected to control the RM mixer.
Note: If you also want wireless control of your RM-series mixer from UC Surface
or QMix-AI software, you'll need to use the USB Wi-Fi LAN adapter included
with the RM mixer and a wireless router connected to your computer.
StudioLive
CS18AI
™
Owner's Manual
20