Removing The Fan - Fujitsu Amilo Pro V2040 Service Manual

Removing the FAN

1. See "Removing the Battery" on page 5
2. See "Removing the Hard Disk Drive Module" on page 10
3. See "Removing the Middle Cover" on page 11
4. See "Removing the Keyboard" on page 12
5. See "Removing the Optical Disk Drive Module" on page 13
6. See "Removing the LCD Module" on page 17
7. See "Removing the Upper Case" on page 25
8. See "Removing the Main Board" on page 29
9. Remove the three screws and one screw nut and remove the acetic acid tape.
Step
1-2
3
10. Remove the other one screw as shown and remove the acetic acid tape.
11. Disconnect the FAN cable and remove the FAN.
30
Size (Quantity)
M2 x L4 (2)
M2 x L6 (1)
M2.5 x L2.5 (1) - Nut
Color
Black
Silver
Torque
1.2 kgf-cm
1.2 kgf-cm
Amilo Pro V2040