Table of Contents
Advertisement
Adjusting fan control
You can adjust the fan control in the BIOS Setup Utility. The following settings are available:
•
Normal: The system is cooled to ensure that the maximum system performance is always
available and to keep the housing temperature as low as possible.
•
Silent: The fan rotation speed, and thereby the noise created by the fan, is reduced.
The default setting of this system is Silent.
► Call up the BIOS Setup Utility.
► In the menu Advanced - Miscellaneous Configurations select the Fan Control function.
► Choose the setting Normal or Silent.
Instructions for how to call up and operate the BIOS-Setup-Utility can be found
in chapter
With the Fujitsu Utility Function Manager you can also switch between
these two settings with Windows.
You can find the Fujitsu Utility Function Manager in the Windows start menu under
Settings - Extras and online at "https://support.ts.fujitsu.com/".
In the Function Manager, select the Fan menu item with the options Quiet
Mode (corresponds to Silent) and Normal Mode.
Fujitsu
"Settings in BIOS Setup Utility", Page
Working with the notebook
60.
33
Advertisement
Table of Contents
