Table of Contents
Advertisement
Settings
You can manually set your own production environment. Set menu structure may vary depending on the firmware version.
Settings
1. Select [AK500N-Settings] on the home screen.
2. Set by selecting the desired item.
You can also select the setting menu by selecting [
on the top, or [Notification bar] screen at the bottom
of the screen.
Ethernet
Connect of disable the wired network.
- Auto IP: IP is set automatically.
- Manual IP: Set by directly entering information
such as IP address, DNS.
Wi-Fi
Connect of disable the wireless network.
Please refer to the page 56 for a detail method of
setting the network.
Bluetooth
Connect of disable the Bluetooth remote control.
Please refer to [Using Bluetooth] on the page 45 for
a detail method of setting the Bluetooth.
]
Ripping the CD
Automatic CD Ripping: Set an automatic CD ripping.
Manual CD Ripping: If you set the 'Manual CD Ripping',
[CD Ripping] menu will be activated after the device
recognizes the CD from the CD insertion slot.
Ripping folder: Set the folder to save the ripped files.
Ripping file format: Set the format of the file for ripping.
Ripping speed: Set the ripping speed.
Set Error checking: Turn on/off the function that
checks errors while ripping.
This product does not support playing a CD.
If you activate the Error checking function, it will
attempts compensate for data errors for several
times. So the CD ripping speed will be slow if you
activate this function.
5 2
Using the Device
Advertisement
Table of Contents
