Astell & Kern AK500N Instruction Book page 50

Installing USB DAC
1. Set [Settings-Connecting
USB] as [DAC input].
2. Connect the product and
a PC by using a USB
cable for data transfer.
3. Run the 'Setup.ext' file
on the Driver.
4. Press [Next] if the
following screen appears.
- When the following
screen appears, please
check if [Settings-
Connecting USB] is set
as [DAC Input].
5. Press [Browser] to set the
folder to install the driver,
and then press [Install].
6. If the following screen is
displayed, press [Finish]
to complete the installation.
<After installing the driver>
4 9
Using the Device