Specifications - Sanyo HEC-DR7700 Service Manual

Specifications

Power source
Power consumption
Power dissipation of electric heating equipment
Rating time
Timer
Dimensions
Weight
Accessories
Exterior cloth
Massaging frequency
Tapping frequency (Upper body)
Tapping width (Upper body)
Vertical movement speed
Spine stretching width
Range of partial stretching
Medical treatment range
(UP DOWN direction)
Height adjustment of
massaging rollers
Reclining angle
Reclining method
Lower body massaging
(Air pressure)
AC Local voltage 50/60 Hz
(WHOLE BODY SENSOR AUTOMATIC COURSE) Approx. 15 minutes (maximum Approx. 20 minutes)
(AUTOMATIC COURSE) Approx. 15 minutes
(MANUAL COURSE) Approx. 15 minutes
730 mm[width] x 1,350 mm[depth] x 1,220 mm[height]
* When not reclined (with foot rest retracted)
730 mm[width] x 1,840 mm[depth] x 760 mm[height]
* When reclined (with foot rest set horizontally)
Stand, Installation screws(Three)
(5 stages) Approx. 10 - 30 times/min.
(5 stages) Approx. 300 - 600 times/min.
(5 stages) Approx. 70-130mm
One up/down pass in approx. 35 sec.
(5 stages) Approx. 70-130mm
Partial stretching(Long) :Repetition within Approx.200mm
Partial stretching(Short) :Repetition within Approx.100mm
(Massaging rollers movement range : Approx. 660 mm)
No gradation or 1cm/one press of button
Approx. 120 - 170 degrees
Back rest : Motor-driven type (Linked with foot rest)
Foot rest : Motor-driven type (Foot rest only)
Seat surface : Motor-driven type (Linked with back rest and foot rest)
(3 stages) Approx. 23 - 32 kPa
* There is a slight difference according to the part.
- 2-
290 W
33 W
30 minutes
Approx. 83kg
Artificial leather
Approx. 790 mm
HEC-DR7700