Table of Contents
Advertisement
Quick Start Guide
Evaluation Board (EVB) PAN1311/21 USB
5.2 PORT CONFIGURATION
Please note that the eBMU Toolbox can handle only COM port numbers below 10. You can
configure in the System Hardware settings in your operating system. The USB driver can be
found in the installation folder.
On the settings tab the communication via COM port is handled. It is possible to set a
number of default parameters for both EVBs and to save/load all the changes made to this
page (saving the settings will also make the program remember the selected port numbers).
Please select the right port numbers for both EVBs (found at Windows OS: control panel
system
hardware
open/close 1 & open/close 2. A status message should appear below the text fields (figure
3). Leave the rest unchanged for now.
PANASONIC ELECTRONIC DEVICES EUROPE
device manager
Figure 5 : COM port setup
GmbH
No.
DS-PAN1311/21USB
PAGE
DATE
Ports (COM & LPT)) and click the buttons
REV.
1.1
5 of 11
15.09.2011
DESIGNED
Erstellt
IW
Advertisement
Table of Contents
