ZyXEL Communications ZyWALL 5 Support Notes page 129

10. On Gateway Policy Information, you should choose ToSonicWALL IKE policy for your IPSec
rule.
11. On Local Network, choose Subnet Address for your Address Type. Starting IP Address and
Ending IP Address/Subnet are your local site LAN IP addresses. In this example, you should
type 192.168.1.0 on Starting IP Address field and then type 255.255.255.0 on Ending IP
Address/Subnet field.
12. On Remote Network, choose Subnet Address for your Address Type. Starting IP Address and
Ending IP Address/Subnet are your remote site LAN IP addresses. In this example, you should
type 192.168.168.0 on Starting IP Address field and then type 255.255.255.0 on Ending IP
Address/Subnet field.
All contents copyright (c) 2006 ZyXEL Communications Corporation.
ZyWALL 5 Support Notes
129