Table of Contents
Advertisement
IMPORTANT INSTALLATION
INSTRUCTIONS
WARNING- To reduce the risk of severe
injury or death:
1.
READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS.
2.
Install only on a properly balanced garage door.
An im-
properly balanced door could cause severe injury.
Have a
qualified service person make repairs to cables, spring as-
semblies, and other hardware before installing the opener.
3.
Remove all ropes and remove or make inoperative all locks con-
nected to the garage door before installing opener.
4.
If possible, install the door opener 7 feet or more above the
floor. Mount the emergency release 6 feet above the floor.
5.
Do not connect the opener to source of power until instructed
to do so.
6.
Locate the control button: (a) within sight of door, (b) at a min-
imum height of 5 feet so small children cannot reach it, and
(c) away from all moving parts of the door.
7.
Install the Entrapment Warning Label next to the control but-
ton in a prominent location. Install the Emergency Release
.,
Marking. Attach the marking on or next to the emergency
release.
8.
After installing the opener, the door must reverse when it con-
tacts a 1-1 /2 inch high object (or a 2 by 4 board laid flat) on
the floor.
Page 2
Hide quick links:
Advertisement
Table of Contents
