DeLonghi TCH8093ER Instructions Manual page 3

A) If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should
be cut off from the mains lead, and an appropriate plug fitted, as below.
WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere
in the house as this could cause a shock hazard.
With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-
on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In
the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your
nearest electrical
dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.
B) If your appliance is not fitted with a plug, please follow the instructions provided below.
The wires in the mains lead are coloured in accordance with the following code:
As the colours of the wires in the mains lead may not correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
The blue wire must be connected to the terminal marked with the letter N or coloured black. The brown wire must be connec-
ted to the terminal marked with the letter L or coloured red. if you have a 3-pins plug, do not connect any wire to the
"earth" terminal.
- Voltage and wattage can be found on the rating label on the underside of the machine.
electrical connection (UK only)
impoRTanT
Blue: Neutral
Brown: Live
2