Fostex HP-A8C Owner's Manual page 16

Setting item
"INPUT SEL MODE"
Selects the function of the
input sel switch on the main
unit or the INPUT SEL key on
the remote controller.
"SD REPEAT MODE"
Selects the repeat range of the
SD card playback.
"LCD ON/OFF"
Selects the lighting pattern of
the LCD display.
"AUTO POWER OFF"
Selects the ''AUTO POWER OFF''
mode ON or OFF.
"SYSTEM INFO"
Displays the current software
version.
16
Setting value
Default: "INCREMENT"
"INCREMENT"
The input source will change at every operation of the
input sel knob on the main unit or the INPUT SEL key
on the remote controller.
"DIRECT SELECT"
To change the input source, select the desired source first
with the input sel on the main unit or the INPUT SEL
key on the remote controller, and then press the input
sel switch on the main unit or the  key on the remote
controller.
You can change to the desired source quickly by skipping
unnecessary sources.
Default: "FOLDER"
"FOLDER"
Repeats the current folder ("F" indicator is displayed).
"ALL"
Repeats the whole card ("A" indicator is displayed).
"SINGLE"
Repeats the current file ("1" indicator is displayed).
Default: "ON"
"ON":
LCD is always on.
"OFF":
LCD turns off 8 seconds after the operation.
Default: ''ON''
"ON":
The HP-A8C will automatically turn OFF the power, when
the operation continues for about 30 minutes.
"OFF'':
The HP-A8C does not automatically power OFF. i.e., it
keeps powering ON even after 30 minutes of operation.
Default: "VerX.XXX"
"VerX.XXX"
Current version.
"VERSION UP"
Executes the update. (page 18)
"RESET"
Returns to the factory settings (page 17).