Listening To An External Audio Device; Listening To The External Device; Adjust The Volume - Fostex HP-A8C Owner's Manual

Listening to an external audio device

You can enjoy music from the external audio device connected to the unit through
headphone output or analog output.
Connect the desired device before the operation. (page 9)
„ Listening to the external device
„
1 Turn on the product.
Push in the power switch
The power indicator lights in red when the
power is on.
HPA8
HPA8 HPA8
32BIT DAC
32BIT DAC C
HEADPHONE AMPLIFIER
HEADPHONE AMPLIFIER R
on on
off off
power power output sel output sel
• When an amplifi er is connected, turn the
volume of the amplifi er to the minimum
before powering on the product.
2 Select the input source.
Turn the input sel knob on the main unit,
or press the INPUT SEL key on the remote
control.
HPA8 HPA8
HPA8
32BIT DAC
32BIT DAC
HEADPHONE AMPLIFIER 32BIT DAC
HEADPHONE AMPLIFIER
HEADPHONE AMPLIFIER
on
on
on
off
off
off
power output sel
power power output sel output sel
• "AES/EBU": Device connected to [AES/EBU]
• "USB": Computer connected to [USB]
• "RCA": Device connected to [ANALOG IN]
• "SD": Inserted SD card (  page 12)
• "COX": Device connected to [COAXIAL]
• "OPT1": Device connected to [OPTICAL 1]
• "OPT2": Device connected to [OPTICAL 2]
.
Power indicator
volume volume
1 1 phones phones 2 2 input sel input sel
Input source name
volume
volume
volume
1 phones 2 input sel
1 1 phones phones 2 2 input sel input sel
3 Select the output source.
Select headphones or analog output.
HPA8
HPA8
32BIT DAC
32BIT DAC
HEADPHONE AMPLIFIER
HEADPHONE AMPLIFIER
on on
off off
power output sel
power output sel
• Listening via headphones:
Do not push in the output sel switch
• Listening via analog output:
Push in the output sel switch

4 Adjust the volume.

Turn the volume knob on the main unit, or
press the +/– key on the remote control.
HPA8
HPA8
32BIT DAC 32BIT DAC
HEADPHONE AMPLIFIER
HEADPHONE AMPLIFIER
on
on
off
off
power output sel
power output sel
• You cannot adjust the analog output volume
when the "DIRECT" setting is set to "ON".
• You can change the input source selecting
method with the "INPUT SEL MODE" setting
(page16).
<Display during playback>
Input source name
Sampling frequency (Fs)
volume
volume
1 phones 2 input sel
1 phones 2 input sel
volume
volume
1 phones 2 input sel
1 phones 2 input sel
Volume
11