Operation - Dodge Charger SRT 2014 Owner's Manual

The Uconnect® Phone is fully integrated with the vehi-
cle's audio system. The volume of the Uconnect® Phone
can be adjusted either from the radio volume control
knob or from the steering wheel radio control (right
switch), if so equipped.

Operation

Voice commands can be used to operate the Uconnect®
Phone and to navigate through the Uconnect® Phone
menu structure. Voice commands are required after most
Uconnect® Phone prompts. There are two general meth-
ods for how Voice Command works:
1. Say compound commands like "Call John Smith mobile."
2. Say the individual commands and allow the system to
guide you to complete the task.
You will be prompted for a specific command and then
guided through the available options.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131
• Prior to giving a voice command, one must wait for the
beep, which follows the "Listen" prompt or another
prompt.
• For certain operations, compound commands can be
used. For example, instead of saying "Call" and then
"John Smith" and then "mobile," the following com-
pound command can be said: "Call John Smith mobile."
• For each feature explanation in this section, only the
compound command form of the voice command is
given. You can also break the commands into parts and
say each part of the command when you are asked for it.
For example, you can use the compound command form
voice command "Search for John Smith," or you can break
the compound command form into two voice commands:
"Search Contact" and when asked "John Smith." Please
remember, the Uconnect® Phone works best when you
talk in a normal conversational tone, as if speaking to
someone sitting a few feet/meters away from you.
3