Table of Contents
Advertisement
Listening to Bluetooth enabled devices (continued)
Notes:
If a device such as microwave oven, wireless
●
LAN card, Bluetooth device or any other device
that uses the same 2.4 GHz frequency near
the system some sound interruption may be
heard.
The transmission distance of the wireless
●
signal between the device and the sound bar
is about 32' (10 m), but may vary depending on
your operating environment. If a steel concrete
or metallic wall is between the device and the
sound bar, the system may not operate at all,
because the wireless signal cannot penetrate
metal.
If this sound bar or the source device is turned
●
off before Bluetooth connection is completed,
pairing will not be completed and the pairing
information will not be memorized. Repeat step
1 onwards to start pairing again.
To pair with other devices, repeat steps 1 - 5
●
for each device.
This sound bar can be paired to a maximum
of 99 devices. If subsequent device is paired,
the oldest device paired, will be deleted and
replaced with the new one.
Once a device is ousted or deleted from the
●
pairing list, the pairing information for the device
is also deleted. To listen to the sound from the
device again, it needs to be re-paired. Perform
steps 1 - 5 to pair the device again.
■ Listening to the sound
Check that:
The source device Bluetooth functionality is ON.
●
Pairing of this sound bar and the source device
●
is completed.
Sound bar is in connected mode (pairing
●
indicator (BLUE) lights up.)
Any device connected to the AUDIO IN or
●
OPTICAL IN jack is turned off.
1
Press the ON/STANDBY button to turn the
power on.
2
Press the INPUT button to select Bluetooth
function.
3
Start the Bluetooth connection from the
Bluetooth stereo audio source device.
4
Playback will start automatically, otherwise
press play (on the remote control or the
source device).
Notes:
For various Bluetooth operations, refer "NFC
●
connection for audio playback" on page 16.
If the source device has an extra bass function
●
or equalizer function, set them to off. If these
functions are on, sound may be distorted.
Notes:
Make the Bluetooth connection again if the
●
source device is not turned on, or its Bluetooth
functionality is off or is in sleep mode.
■ To disconnect the Bluetooth
device
Perform any of the followings.
- Disconnect the Bluetooth connection on the audio
source device.
Refer the operating manual supplied with the
device.
- Turn off the Bluetooth stereo audio source
device.
- Turn off this sound bar.
Note:
The volume of this sound bar may not be controlled
as intended depending on the device.
E-18
Hide quick links:
Advertisement
Table of Contents
