Table of Contents
Advertisement
LEFT HANDLE ASSEMBLY
Locate the machine in the fl oor and make sure that the
left handle is perpendiculate to the machine axis, check
the correct position of the left handle before attaching
the handle
Tighten the screws with the allen key, making sure that
the handles is in it's correct position.
WARNING! Don't tighten the screws
too much, if they are getting too tight,
mechanical problems can appear,
maximum torque is 10 Nm
STARTING UP
SHAFT ASSEMBLY
Introduce the first part of the shaft, with diameter 34mm,
inside the union parts of the machine
Tighten the screws of the union parts in the order
showed on the picture bellow
Turn the shaft
Tighten the screws of the union parts in the order
showed on the picture bellow
2
3
1
2
3
1
English
–
9
Advertisement
Table of Contents
