Download Print this page

Master Bilt IHC-48 Specification Sheet

Ihc series ice cream hardening and holding cabinets

Advertisement

Quick Links

IHC-48
FEATURES
STANDARD
ELECTRONIC CONTROL
• Allows user to easily monitor
defrost functions from the panel
interface on the front of the
merchandiser
• Audible and visual alarm
• Decreases service time and calls
• Eliminates room thermostat,
defrost termination/fan delay
control, defrost timer and
digital thermometer or other
temperature indicator
CONSTRUCTION
• Heavy-duty 6"-7" adjustable legs
• 4 heavy-duty welded wire gray epoxy-
coated cantilever shelves per section
• 2
/
" foamed-in-place "zero ODP"
1
2
urethane insulation
FINISH
• Stainless steel front
• Anodized aluminum sides and interior
The IHC series
contains the most
powerful standard
refrigeration
system in its class.
DOORS
• Two staggered height, energy saving
insulated inner doors with magnetic
catches per section
• Door swing:
IHC-27 .............................hinged left
IHC-48 ............. left door hinged left,
• Self-closing doors with 90° hold-open
feature
• Sure-sealing magnetic gaskets
(replaceable)
• Heavy-duty horizontal door handle
• Anti-condensate door frame heater
• 2" stainless steel foamed-in-place doors
• Lift-off inner and outer doors
REFRIGERATION
• Refrigerant: R-404A
• Self-contained, top mounted,
semi-hermetic refrigeration system
• Minimum 4" clearance required be-
tween cabinet back and wall
• Temperature range:
0° to -37°F (-18° to -38°C)
• R-factor (insulation efficiency rating):
21.55 on walls, 17.24 on doors
908 Highway 15 North • New Albany, MS 38652
PHONE: 800-647-1284 or 662-534-9061 • FAX: 800-232-3966 or 662-534-6049 • www.master-bilt.com
ITEM NO. ______________________________________________________
PROJECT ______________________________________________________
LOCATION _____________________________________________________
DATE _________________________ QTY. ___________________________
IHC SERIES
Ice Cream Hardening
And Holding Cabinets
MODELS
❑ IHC-27
❑ IHC-48
right door hinged right
• Drain plumbing hookup recom-
mended. Condensate pan avail-
able if there is no access to drain
plumbing. Condensate pan must
be field installed and requires a
dedicated 15 amp, 120 volt circuit.
WARRANTY
• Standard limited three year extend-
ed compressor and two year limited
parts and labor
OPTIONS
❑ Add suffix "R" for remote system
on IHC-48 only
❑ Casters
❑ Extra welded wire gray epoxy-
coated cantilever shelves
❑ Pan rack
❑ Voltage boosting transformer
❑ Condensate evaporator drain pan
NOTE: Must be field installed and
requires a dedicated 15A, 120v
circuit.

Advertisement

loading

Summary of Contents for Master Bilt IHC-48

  • Page 1 • Two staggered height, energy saving insulated inner doors with magnetic catches per section • Door swing: IHC-27 ...hinged left IHC-48 ... left door hinged left, right door hinged right • Self-closing doors with 90° hold-open feature • Sure-sealing magnetic gaskets (replaceable) •...
  • Page 2 (mm) MODEL IHC-27 2083 IHC-48 1321 2083 *Height includes 6-7" adjustable legs. **IHC models operate on a minimum of 208 volts. A voltage boosting transformer (part no. 39-01087) must be used when the supply voltage is less than 208 volts.

This manual is also suitable for:

Ihc-27