Section 9: Installing The Firestones - Montigo R320 Installation & Maintenance Manual

Section 9: Installing the Firestones

The R320* / R420* is supplied with glass firestones. To install the
firestones remove the trim and door as shown in the previous section.
Follow these instructions to ensure all parts are removed or replaced
as required. Once the trim and glass door is removed, place the
firestones randomly around the burners as shown in Figures 22
and 22a.
Note: DO NOT cover the burner with firestones or any other
media.
Figure 22. Completed glass Firestone installation.
Figure 22a. Operating Propane gas fireplace with designer glass Firestones
surrounding burner tray.
Firestones
R320* requires three 3lbs bags for a total of 9lbs of firestones
R420* requires four 3lbs bags for a total of 12lbs of firestones
XG0770 - 100614
Installation
Optional River Rocks
The R320*/R420* has the option of installing the cultured rocks
which mimic real stone. These may be spaced at random, or in
a visual pattern of your preference. See the Montigo web site for
photographs and ideas.
www.montigo.com
Do not operate this fireplace without the glass door or with a broken glass door.
R320 & R420 Power Vent Indoor Gas Fireplace
NOTICE
Page 29