Air Index; Specifications - Honda HRC216HXA Owner's Manual

Air Index

An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine's emission durability period. The descriptive term
indicates the useful life period for the engine's emission control
system. See your "EMISSION SYSTEM WARRANTY" on
additional information.
Descriptive Term
Moderate 50 hours (0 ~ 80 cc)
125 hours (greater than 80 cc)
Intermediate 125 hours (0 ~ 80 cc)
250 hours (greater than 80 cc)
Extended 300 hours (0 ~ 80 cc)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)

Specifications

Mower Features
HRC2163HXA Hydrostatic transmission, blade brake
clutch, recoil starting, Microcut
blades,
9 inch wheels
Dimensions and Weights
Length
Overall Height
Dry Weight
Wheelbase
Cutting Width
Cutting Height
(8 adjustable
positions)
Engine Design and Performance
Model
Type 4-stroke, single-cylinder, overhead-valve,
Displacement
Bore and stroke
Compression ratio
Ignition system
page 23
Applicable to Emissions
Durability Period
®
twin
65.4 in (1660 mm)
39.8 in (1010 mm)
123 lb (55.8 kg)
25.6 in (650 mm)
21.3 in (541 mm)
3/4 ~ 4 in (19 ~ 101 mm)
GXV160
forced air-cooled
9.9 cu in (163 cc)
2.7 x 1.8 in (68 x 45 mm)
8:1
Transistorized magneto
Transmission Design and Performance
Transmission Type
Maximum Mower Ground
Speed (engine at 3.100 rpm)
Maintenance
Fuel Unleaded gasoline with a pump
octane rating of 86 or higher containing
for
no more than 10% ethanol by volume
Capacity: 0.37 gal (1.4 L)
See "AVOIDING FUEL-RELATED
PROBLEMS" on
Blade Bolt
Torque
Engine Oil
Spark Plug
Gap: 0.028 ~ 0.031 in (0.7 ~ 0.8 mm)
Maximum
Governed
Speed
Valve
clearance
(cold)
* Actual amount will vary due to residual oil in the engine. Always
use the dipstick to confirm the actual level
**Do not try to increase the engine speed above the maximum
governed speed; the blades could fracture and come apart and/or
other damage may occur.
Hydrostatic, fluid drive, infinitely
variable speeds
1.78 m/s (3.98 mph)
page 20
36 ~ 43 ft-lb (49 ~ 59 N•m)
SAE 10W-30, API SJ or later
Capacity: 0.69 qt (0.65 L)*
Type: NGK - BPR5ES
2,950 ~ 3,150 rpm **
Intake: 0.15 ± 0.02 mm
Exhaust: 0.20 ± 0.02 mm
(page 7).
page 7
page 12
page 13
page 14
Shop
manual
Shop
manual
19