Table of Contents
Advertisement
Test the Connection
Pick up the handset from the base and press
pick up line 1 automatically and change the display to show Talk
and you should hear a dial tone.
When you get a dial tone, make a test call; press
If...
the base display says
Check or you don't hear a
dial tone
you keep hearing a dial
tone
there's a lot of noise or
static
the handset display says
Unavailable
Test Line 2
Once you can make calls on line 1, make a test call on the second
line. Pick up the handset and press the unmarked key under
You should hear a dial tone and the display should show Talk
SUN 12:00A
Handset #1
.+0'
/'07
.+0'
Test any accessory handsets the same way. If you can't get a dial
tone or the handset display says Unavailable, try moving the handset
closer to the base or resetting it (see page 40).
Try...
checking the connection between the
base and the phone jack: make sure
the cord is connected to
setting line 1 to pulse dialing (see page
6).
see page 38 for tips on avoiding
interference.
resetting the handset (see page 40). If
you have accessory handsets, try using
a different handset for the test call.
If...
Try...
checking the connection
the display says
between the base and the phone
Check or
jack: if you have a separate jack
you don't hear a
for each line, make sure the
dial tone
cord is connected to
you keep
setting line 2 to pulse dialing
hearing a dial
(see page 6).
tone
. The phone should
TALK
to hang up.
END
TEL LINE 1/2
LINE2
.
TEL LINE 2
,
.
.
.
5
Advertisement
Table of Contents
