Pad Assembly - Fujitsu ScanPartner 15C Consumable Replacement And Cleaning Instructions

ScanPartner 15C, 600C & 620C C
4
R
ONSUMABLE EPLACEMENT AND
R P A
EPLACING THE AD
A defective or improperly installed Pad Assembly can cause miss picks,
skew, or double fed documents. To replace the Pad Assembly perform
the following steps.
• Remove all the
documents from the
ADF Paper Chute.
Open the ADF by
pressing the ADF
button.
• Remove the ADF Pad
Assembly by pressing
the two knobs on the
top of the Pad
Assembly and sliding it
out to remove it.
• Attach the new Pad
Assembly by pressing
the two knobs on the
top of the Pad
Assembly and sliding it
down into the slots to
lock it in place.
C I
LEANING NSTRUCTIONS
SSEMBLY
ADF Button
Left
Guide
Balance
Wire
Document
Right
Guide

Pad Assembly

Pick and
Feed
Rollers