Selecting Number Of Cups To Brew - KitchenAid KCM0802 Instructions Manual

OPERATING THE COFFEE BREWER
The minute display will start to flash
3
next. Use the "+" or "-" toggle bar to
choose the correct minute setting, then
press SET to make your selection.
NOTE: To go directly to the clock display menu, when the Coffee Brewer is already on,
press the MENU button four times, until the hour display begins to flash.

Selecting number of cups to brew

From the main menu, use the "+" or
1
"-" toggle button to choose the number
of cups you want to brew, between
2 and 8. When the desired number is
displayed, you are ready to brew.
The AM/PM display will flash last. Use
4
the "+" or "-" toggle bar to choose the
correct AM/PM setting, then press SET
to go back to the programming menu.
NOTE: 8 Cups is the default setting.
NOTE: If the water in the tank has been
sitting for awhile and you wish to start
fresh, select 8 cups and press the BREW
button (without coffee in the brew basket).
This will cycle through any stale water
in the tank.
9