D-Link DSL-300T Quick Installation Manual page 6

Configuring the Modem (continued)
In the Connection menu, type the
your ISP account. It may be necessary to change the PPP encapsulation
connection. You may also need to change the
settings to you if they need to be changed. Click the
the information. To save the changes made to Connection, click the
instructions on the next page.
A. Type the Username
and Password used for
your account.
C. Click the Apply
after you have entered the
account information.
Username
button
and Password used to verify the identity of
VPI or VCI value. Your ISP will give these
Apply button when you have entered all
D. Click Tools when
you have applied the
new settings.
6
Type used for your
Tools tab and follow the
B. Check the PPP
encapsulation Type,
VPI: and VCI: - if these
values are not correct,
change these according
to the instructions of
your ISP.