Panasonic Touchbook CF-17 series Reference Manual page 20

Computing On The Road
Setting Timeout Function
1
Run the Setup Utility
2
Using and
3
Using and
4
Using and
press Enter
5
Using and
Adapter] and press
6
Using and
nation Timeout] (or [Suspend Timeout]) and press
7
Using and
8
Press F10 , then select [Yes]
N O T E
When [ECO Mode Timeout] and [Suspend/Hibernation Timeout] are set to [Dis-
able] in the Setup Utility,
Even when a CD-ROM is running, the computer enters the ECO Mode with the
ECO Mode Timeout.
CAUTION
When installed in a network environment.
Be sure to disable the suspend/hibernation timeout settings with the Setup Utility.
After resuming operation from the suspend or hibernation mode, the network
connection may be severed or the computer will not work properly.
When a device like a high-speed modem or ISDN terminal adapter is con-
nected to the serial port, etc.
There are times when high-speed communication is adversely affected if the
power management function is enabled. Please confirm that
pressing
+
Fn F8
finished using a communications device, you can enable the power management
function by pressing
Key operation and music playback.
When the power management function is running, you may feel that keyboard,
touch pad, or touchscreen (or mouse) operations are sluggish. Furthermore,
music may not be played back correctly when entering the ECO mode during
playback.
( page 37)
, select [Power]
, select [Power Switch] and press
, select either [Suspend] or [Hibernation] and
, select either [Battery Operation] or [AC
Enter
, select either [ECO mode Timeout] or [Hiber-
, select the timeout setting and press
does not work.
Fn + F8
to disable the power management function. After you have
Fn + F8 .
2 0
Enter
Enter
Enter
is displayed by