Dhcp Clients List - TP-Link TL-WR720N User Manual

DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must

have another DHCP server within your network or else you must configure the computer
manually.
Start IP Address - Specify an IP address for the DHCP Server to start with when assigning

IP addresses. 192.168.0.100 is the default start address.
End IP Address - Specify an IP address for the DHCP Server to end with when assigning IP

addresses. 192.168.0.199 is the default end address.
Address Lease Time - The Address Lease Time is the amount of time a network user will

be allowed connection to the Router with their current dynamic IP Address. Enter the
amount of time in minutes and the user will be "leased" this dynamic IP Address. After the
time is up, the user will be automatically assigned a new dynamic IP address. The range of
the time is 1 ~ 2880 minutes. The default value is 120 minutes.
Default Gateway - (Optional) Suggest to input the IP address of the LAN port of the Router,

default value is 192.168.0.1.
Default Domain - (Optional) Input the domain name of your network.

Primary DNS - (Optional) Input the DNS IP address provided by your ISP. Or consult your

ISP.
Secondary DNS - (Optional) Input the IP address of another DNS server if your ISP

provides two DNS servers.

Note:
To use the DHCP server function of the Router, you must configure all computers on the LAN as
"Obtain an IP Address automatically" mode.
4.7.2

DHCP Clients List

Choose menu "DHCP→DHCP Clients List", and then you can view the information about the
clients attached to the Router in the next screen (shown in Figure 4-27) .
ID - The index of the DHCP Client.

Client Name - The name of the DHCP client.

MAC Address - The MAC address of the DHCP client.

Assigned IP - The IP address that the Router has allocated to the DHCP client.

TL-WR720N
Figure 4-27 DHCP Clients List
-42-
150Mbps Wireless N Router