Changing Settings - Miele M 6160 TC Operating Instructions Manual

Changing settings

Some of the standard settings for the
appliance (which are set at the factory)
have an alternative which you can
select if required.
Please consult the chart for the different
options.
The factory settings are marked with a
star* on the chart.
Proceed as follows:
^ Touch X.
X will flash in the display and P and
0 will light up.
^ Touch OK.
P I will appear in the display.
^ Use the rotary selector to select the
setting you wish to change (P I to
P 11 and P 0). Turn it until the setting
required shows in the display.
^ Then touch OK to call up the setting.
The currently valid status appears in
the display, e.g. S 1 etc.
44
^ Turn the rotary selector if you wish to
change the status (see chart), and
confirm your entry by touching OK
(for P 8 and P 0, touch OK for
approx. 4 seconds).
The change is then stored in memory P
will appear in the display again,
together with the number for the setting.
The other settings can be changed in
the same way.
Touch # if you have changed one
setting and wish to switch to another.
^ Press X if you do not want to change
any more settings.
The altered settings are retained
after a power cut.
If there is too long a pause before the
next entry, the time of day reappears in
the display. If this happens, repeat your
entries.