Setting A Pause Time Limit - Precor RBK 615 Product Owners Manual

24

Setting a Pause Time Limit

You can limit how long a user can pause while exercising on
the equipment by entering a time between 1 and 120 seconds
(two minutes). For example, if you set a pause time limit of
60 seconds, the display automatically resets to the Precor
banner if no movement is detected and no key press occurs
for one minute.
Important: The optional power adapter must be connected on
self-powered equipment to establish a definitive pause time limit.
If the optional power adapter is not attached and the rate of
motion drops below the minimum requirements, the equipment
begins its 30-second shutdown, effectively eliminating pause
mode.
To set a maximum pause time:
1.
2. Press OK to accept the displayed setting and move to the
Setting a Cool Down Time Limit
Use this setting to select the maximum amount of time the
machine will remain in the cool down mode. Cool down time
is the period of time following the completion of a program
when the user exercises at a reduced work rate.
To set a cool down time:
1.
2. Use the navigational arrow keys to display the available
3. Press OK to accept the displayed setting and move to the
At the S E T M A X P A U S E T I M E prompt, press OK.
Use the navigational arrow keys to select a time limit
between 1 and 120 seconds (two minutes).
next feature.
At the S E T C O O L D O W N T I M E prompt, press OK.
time limits and choose a time between 0 and 5 minutes.
Note: The default setting is 5 minutes.
next feature.
Product Owner's Manual