Supero 5018A-MLHN4 User Manual page 57

Jumper Description
JBR1 BIOS Recovery Enable/Disable
JBT1 CMOS Clear
JI 2 C1/JI 2 C2 SMB to PCI-Exp. Slots
JPB1 BMC Enable/Disable
JPG1 VGA Enable/Disable
JPL1 LAN Ports Enable/Disable
JPUSB1 USB Wake Enable/Disable
JWD1 Watch Dog
Connector Description
Battery Onboard Battery (JBAT1)
COM1/COM2 COM1/COM2 Port Headers
FAN1-FAN3 System Cooling Fans
JD1 Power LED/Speaker Header
JF1 Front Panel Control Header
JIPMB1 4-pin External SMbus I
JL1 Chassis Intrusion Header
JOH1 Overheat LED Header
JPI 2 C1 Power Supply System Management Bus (SMBus) I
JPK1 LAN3/LAN4 LED Indication Header
JPW1 24-pin ATX Power Connector
JSD1 SATA DOM (Device On Module) Power Connector
JSTBY1 5V Standby Power Connector
JTPM1 Trusted Platform Module (TPM)/Port 80 Connector
JUIDB1 Unit Identifi er (UID) Switch
LAN1/3, LAN2/4 Gigabit Ethernet (RJ45) Ports 1/3, 2/4
IPMI-LAN Dedicated IPMI LAN for IPMI 2.0 Interface
I-SATA0-I-SATA5 Serial ATA Ports 0-5
(CPU1) Slot4 PCI-E 2.0 x4 slot
(CPU1) Slot6 PCI-E 2.0 x8 slot
SP1 Internal Speaker/Buzzer
USB 0/1, 2/3 Backpanel USB 2.0 Ports 0/1, 2/3
USB 4/5 Front Panel Accessible USB 2.0 Headers
Chapter 5: Advanced Motherboard Setup
Default
Pins 1-2 (Normal)
Off (Normal)
Off (Disabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Enabled)
Pins 1-2 (Reset)
2 C Header
5-9
2 C Header