Haier HW-12C03 Service Manual page 70

Operation
Sleep
When the sleep and timing are set simultaneously, the sleep is prior. The sleep will
automatically reset the timing, and cancel the former timing. The setting of time is as below:
Set cooling temperature
Set heating temperature 1 hour
In sleep running, the air velocity can be adjusted. After the sleep finishes, the air
conditioner will resume its former mode automatically.
Adjusting of the air direction
Left/right adjusting
Put the "Louver" button on the remote controller,
the pendulous guide plate automatically adjusts the
left/right air direction. Push again, the plate will
stop at its present position.
Upward/ downward adjusting
Turn the horizontal guide plate gently to adjust the upward/downward air direction.
(As per the above picture).
Emergency running
If the remote controller is lost or damaged, you can
use the Emergency running. Open the small door of the
display board, push down the "Emergency switch" key.
The "Operation" light is on and the conditioner will
perform automatic running, The emergency running disables
setting of temperature, air speed, sleep and timer, etc.
In cooling
In heating
The sleep starts
+1
+1
1 hour
6 hours
-1
-1
The sleep finishes
WIRELESS REMOTE CONTROL
56
Pendulous
Vertical guide plate
Horizontal guide plate
POWER TIMER OPERATION