Cooling Operation - Haier HW-12C03 Service Manual

Cooling operation

1.Start
Press ON/OFF button
2.Select operation mode
Press the "MODE" button. Every time
the button is pressed, operation mode
changes in the following order.
AUTO COOL
Select "cool" mode.
3.Select temp. setting
Select desired temp., Mby using "TEMP."
button.
" " Each press will increase temp. setting by 1 .
" " Each press will decrease temp. setting by 1 .
If the button is kept pressed, temp. setting
will change quickly to your desired figure.
4.Fan speed selection
Press the "Fan" button, every time it is
pressed, fan speed changes as follows:
AUTO
Select desired setting.
Change air flow direction if necessary.
5.Stop
Press ON/OFF button again.
Cautions:
To-protect unit system, don't restart until 3 minutes have elapsed.
If the unit has been running under large humidity for a long time, dew might occur
at outlet grating.
DRY
FAN
HI LOW
50
TEMP
C
3
3
SLEEP TIMER
OFF
ON
HR
AUTO
COOL
MODE
DRY
FAN
2
AUTO
FAN
HI
LOW
4
LOUVER
ON/OFF
5
1