Martin Audio WLXGS User Manual page 8

Main to sub-woofer delays
Reference settings
The following table shows system delays to align various combinations of W8L Series main and sub-woofer
system. These should be treated as important initial settings and will work without further adjustments where
grilles are alignment. They are a good starting point for further time alignment.
The main W8L, W8LC and W8LM parameters will already exist in the standard presets but you will need to
check the user adjustable HPF (High Pass Filter) and Delay (grilles aligned) are set according to the table.
Sub-woofers usually take their signal from a separate controller for W8L and W8LC systems because our
standard band zoned presets use all six bands.
The WLX sub-woofers signal will be on controller output channel 1 for standard W8LM set-ups. The WLX
signal will be on channel 6 where a separate sub-woofer mix is to be used using a W8LM + WLX
configuration.
All material © 2007. Martin Audio Ltd. Subject to change without notice.